Product Info

OTDR
59
Figure 5.2-14 OTDR Measurement complete
5.2.3 Real time mode test
The wavelength type, test range and pulse can be customized in the real-time
mode. The duration cannot be changed. It is fixed to be tested all the time, and the
measurement needs to be stopped manually. Real time mode is a measurement
mode that we provide to observe the curve trend for a long time.
The measurement process in real-time mode is as follows:
1. Clean the connector correctly
2. Connect a startup optical fiber between the tested equipment and the OTDR
port, and set the startup optical fiber length if necessary (see setting analysis
parameters in section 5.4).
3. Click the OTDR icon to enter the OTDR software, and then click the setting
button to enter the parameter setting interface