Product Info

OTDR

Figure 5.2-12 OTDRSetting interface

5、After selecting the general parameters, click the exit button in the upper right

corner to exit the setting page, and then click "start measurement" in the OTDR

interface or click the physical measurement button above the equipment to start

the test.

6. After starting the measurement, there will be corresponding prompt on the

OTDR interface, indicating that the equipment is in the process of measurement.

You can observe the "measuring..." on the main interface. And the timer behind

"sys setting" to judge whether the measurement is completed. Wait for the timer

above the device to zero and the "measuring..." prompt disappears, indicating that

the measurement is completed.