Product Info

OTDR

interface or click the physical measurement button above the equipment to start

the test.

6. After starting the measurement, there will be corresponding prompt on the

OTDR interface, indicating that the equipment is in the process of measurement.

You can observe the "measuring..." on the main interface .And the timer behind

“Sys setting”to judge whether the measurement is completed. Wait for the timer

above the device to zero and the "measuring..." prompt disappears, indicating that

the measurement is completed.

Figure 5.2-6 OTDR Measuring

7、After the measurement is completed, the OTDR interface will display the

measurement results. Sliding the screen up and down can view the detailed data

of event points. The double finger operation curve interface can zoom the curve,

and use A/B to view the specific information of each positioning. (see Chapter 6

management test results for detailed operation procedures)