Product Info

OTDR
49
b. Dry completely with compressed air
2. Carefully align the connector with the port to prevent the end of the fiber from
touching the outside of the port or rubbing with other surfaces
If the connector interface has a convex fixed design, please confirm that it can be
correctly inserted into the corresponding groove of the port during connection
3. Push in the connector to secure the cable in the correct position and ensure full
contact
If the connector has a screw sleeve, tighten the connector to secure the fiber in the
correct position. Do not over tighten the connector, otherwise the fiber and port
will be damaged
Note: if the optical cable is not fully aligned or connected, serious loss and
reflection will occur
5.2 Test
Click OTDR in the main menu to enter the test option. When conducting OTDR test,
the type of optical fiber mode shall be specified and the optical fiber shall be
connected to the correct port to obtain the correct test curve and results. (1.2
product composition in the overview, you can view the interface description)
5.2.1 Test in automatic mode
The application automatically evaluates the best location based on the fiber
connection currently connected to the device. By default, fiber characteristics are