Product Info

OTDR
43
As shown in the column of radial distance ORL in figure (4.3-4). (the principle is
consistent with the determination of welding loss and reflectivity, but the
judgment parameter position is transferred from the event point list to the
detailed information interface. When the value of diameter distance ORL is greater
than the set threshold, the value of diameter distance ORL will also be marked in
red)
Figure 4.3-6 Detail interface
Restore default: click "restore default" to restore the previous general parameters.
4.3 Set link parameters
Click the setting button to open the setting page. Slide down the setting page to
see the following interface. The specific functions of each function bar will be
introduced below：