Product Info

OTDR
41
When the diameter distance loss in the measurement result is greater than the set
value, the curve judgment will not pass, and the threshold range of diameter
distance loss is 0 ~ 45dB.
As shown in the column of diameter distance loss in figure (4.3-6). (the principle is
consistent with the determination of welding loss and reflectivity, but the
judgment parameter position is transferred from the event point list to the
detailed information interface. When the value of diameter loss is greater than the
set threshold, the value of diameter loss will also be marked in red)
Figure 4.3-6 Detail interface
Connector loss: the "connector loss" box in the threshold parameter can change
the threshold of connector loss. When "connector loss" is checked, the test result
will verify the connector loss. When the connector loss in the measurement result
is greater than the set value, the curve judgment will not pass, and the range of