Product Info

OTDR
16
3 OTDR introduction
3.1 Install and remove equipment
OTDR can be divided into GAMMA and OTDR modules (as shown in Figure
3.1)，Both are assembled and disassembled by hexagon socket screwdriver. It is not
recommended to disassemble the OTDR module. After disassembly, it is necessary
to cover the high-speed connector with a protective shell to avoid short circuit
caused by pin connection.
Figure 3.1 OTDR Separation diagram
3.2 Start and shut down the equipment
3.2.1 Start equipment
When the device is in the shutdown state, long press the power key for more
than 4 seconds, the device will initialize for several seconds, and then the main