Product Info

OTDR
14
warning：
Do not use the charger that is not included with the machine to avoid
damage to the power supply and battery of the instrument.
When connecting the charger, please make sure that the voltage of
the connected power supply is within the specified range.
The supplied charger is for indoor use only.
2.3 Laser Safety Information
This instrument is a Class 3R laser product, which complies with IEC60825-1
Amendment 2 Standard: 2001 and 21CFR1040.10. Looking directly at the beam can
cause physical harm.
warning：
Do not install or terminate fibers while the light source is active,
never look directly into the signal-loaded fiber, and ensure your eyes
are protected at all times.
Hazardous radiation exposure may result if controls, adjustments,
and operation and maintenance procedures are not carried out in
accordance with the operating procedures specified below.