Aquatic Fitness System Owner's Manual

Aquatic Fitness System
Troubleshooting Guide
29
Symptom (Cont) Problem Corrective Action
Pressure or Flow Switch Activated:
A pressure or flow switch has been
installed to monitor the system. If 3 lights
are flashing in the bottom of your display,
and no pump(s) is operating, turn the
pump(s) on. If the 3 flashing lights
disappear, this indicates that the pressure
or flow switch was activated although there
was no water flow.
Call your dealer for service.
Call your dealer for service.
A dirty filter limiting the water
flow will also cause this error
message to appear.
Pressure or Flow Switch Not
Activated:
If 3 lights are flashing in the bottom of your
display, and a pump(s) is operating, turn the
pump(s) off. If the 3 flashing lights
disappear, this indicates that the pressure
or flow switch was not activated although
there was water flow.
When the pump is turned on,
there is a 7-second delay
before the system will start to
auto check the pressure or flow
switch.