Sonic Immersion System Owner's Manual and Dealer's Installation Guide

Sonic Immersion System Dealer Installation Guide

Installation of CD Player Door and Bezel

If the bezel is not removed from the door assembly (P/N 01564-04),

remove it by pulling from the bottom of the bezel and then proceed as

follows:

1. Place the door assembly in the cutout. Make certain the door

will open and close freely. Door should open from bottom.

2. Locate 4 # 8 x 1” SS Truss Head screws (P/N 01011-40)

provided with kit. Using an electric screwdriver attach the

door assembly to the panel.