User Manual

Option 4: Max Speed – Single
Direction
This option is set by flipping switch 5 OFF, or down, and
flipping switch 6 ON, or up. Max Speed Mode allows you
to connect another potentiometer to S2 and set the max
speed. If you set this potentiometer to 50%, the
potentiometer on S1 will scale between 0% and 50% over
the entire length of its travel. This mode is very useful if
you are, for example, running off of 24V and want to limit the top speed somewhere around 14V.
Option 5: Max Speed – Bi-directional
This option is set by flipping switched 5 and 6 OFF, or
down. Max Speed Mode allows you to connect another
potentiometer to S2 and set the max speed. This
potentiometer will set the maximum speed of both
directions. This is very useful for limiting the top speed
without having to lower the input voltage.
Option 6: Analog motor reverse
Switch 6 reverses the direction of the motor driver in all
analog operating modes except Diff-Drive Mix, in which
case it is the right/left select switch. This is sometimes
better than physically reversing the motor connections, but
accomplishes the same thing.
Max Speed Mode –
Single Direction
Max Speed Mode –
Bi-directional
Analog One-direction reverse