Quick Start Guide

SyRen 50 Quick Start Guide

April 2011

Congratulations on your purchase of a SyRen 50 regenerative motor driver. SyRen 50 is one of the most

flexible and configurable motor drivers on the market. As a result, it must be set to the correct operating

mode before use. Below is a generalized hookup diagram of a SyRen 50. On the reverse side is a chart

of some of the most commonly used operating modes.

SyRen 50

Input voltage:

6V-24V

Output current:

50A

Peak Output

current:

100A

Operating

modes:

Analog, R/C,

Serial

For full product documentation and manual, please visit

http://www.dimensionengineering.com/SyRen50.htm

PAGE 1
SyRen 50 Quick Start Guide April 2011 Congratulations on your purchase of a SyRen 50 regenerative motor driver. SyRen 50 is one of the most flexible and configurable motor drivers on the market. As a result, it must be set to the correct operating mode before use. Below is a generalized hookup diagram of a SyRen 50. On the reverse side is a chart of some of the most commonly used operating modes.
PAGE 2
Operating mode reference chart. All options are set via the DIP switches Analog bi-direction: a 0V to 5V analog input is connected to terminal S1. 0V is full reverse, 5V is full forward and 2.5V is stop Analog single-direction: a 0V to 5V analog input is connected to terminal S1. 0V is stop and 5V is full forward. R/C standard: An R/C servo signal is connected to terminal S1. A 1000us pulse is full reverse and a 2000us pulse is full forward. 1500us is stop.