Installation Guide

Step 3:
Plug SportBEC’s pigtail into the battery port of your receiver, or any other empty
channel.
Optional step 4:
If you want, you can put a small piece of tape to cover SportBEC’s exposed pins but this
is purely optional.
Step 5:
Secure the SportBEC to the airframe with Velcro, double sided tape or rubber bands.
Verify ESC and servo functionality before your first flight. For best results, ensure that
the SportBEC is installed at least 2-3 inches away from your receiver. Ideally you want
the unit mounted in a spacious area, with lots of airflow around it to ensure good cooling,
similar to how you would mount your ESC. This completes the installation of the
SportBEC.