Manualshelf

Data Sheet

ManualsBrandsDimension Engineering ManualsBrushed DC Motor ControllersSabertooth Dual 2x32A 6V-24V Regenerative Motor Driver
31323334353637383940
www.dimensionengineering.com/products/Sabertooth2x32
General tab
The General tab contains settings that affect the Sabertooth 2x32 in all modes and for all outputs.
Startup Delay
Startup Delay sets how long the Sabertooth 2x32 waits after power is applied to begin operation. This
delay is to allow host microcontrollers to boot, receivers to start and analog voltages to stabilize.
Min Voltage and Max Voltage
Min Voltage and Max Voltage set the input voltages within which the Sabertooth 2x32 will operate
normally. If the input voltage is outside this range, all motor and power outputs will be off.