Installation Guide

Optional Thermal probe:
The optional thermal probes will provide a cutoff when the battery is in danger of
damage due to overheating. Thermal probes install into the Probe or PC port
When a thermal probe is detected, the red Temp LED will light. If the CellShield has
detected a temperature above 150 degrees Fahrenheit, the Temp LED will flash until
power is removed. When a temperature of more than 150 degrees is encountered,
CellShield will reduce the throttle setting to reduce the battery temp. If the temperature
remains above 150 degrees, CellShield will gradually cut off throttle.
The thermal probes are removable, so they may be permanently attached to the battery if
desired.