User Manual

AnyVolt Micro
Features
2.6V to 14V output voltage range
2.6V to 14V input voltage range
0.5A max input or output current at 10V
<50mV typical ripple
No external components needed
Weighs 3 grams
Thermal protection
Overcurrent protection and short circuit protection
Applications
Lab work and prototyping
Powering small audio amplifiers
Driving multiple LEDs in series
Backlit LCD drive
Solar powered applications
Remote video transmitters
Battery powered applications
Renewable energy source applications
Powering things from two AA batteries
General Description
The AnyVolt Micro is a miniature step up / step
down switching DC-DC converter. The output
is adjustable from 2.6 to 14V.
The output voltage is set with a small screw
potentiometer on the side of the AnyVolt
Micro. Once the output voltage is set, it does
not matter whether the input voltage is higher,
lower, or the same as the desired output.
The AnyVolt Micro is pin-compatible with the
common 78XX series of linear voltage
regulators, so it will work with breadboards
and other popular prototyping methods.