Installation Guide

1、New installations
NOTE!!!
1.Supply lines should be purged to clean impurities
before connecting the unit.
2.The hot water supply should be connected to the left
and the cold water supply to the right, when viewed from
the operating position. If this is not taken into account can
cause permanent damage to the cartridge.
3.Screw connections and test for leaks.
4.Using a spirit level on the cams, the mixer align
horizontally,vertically and parallel to the wall.
5. Warm reminder:
In the cold areas or the indoor temperature is less than
39ºF in Winter, if no using the faucets for a long time,
please turn off the inlet water valve and drain the
remaining water inside the supply pipe, which can avoid
the faucet damage caused by the expansion of the frozen
water.
1.Read the instructions carefully before installing.
2、Installation Preparation
2.The installation must be performed by a qualified
person.
3.Installation tools:
8
Handle shower
1
7
Elbow with hook
1
6
Shower hose
1
5
1
4
Thermostatic handle
1
3
Diverter handle
1
2
Cover board
1
1
Thermostatic valve
1
Qty.
9
Shower head
1
10
Shower arm
1
11
Cover board
1
No.
Description
12
Allen-key
1
Nails bag
6
9
10
11
12
13
8
7
3、Accessory Drawing
1
2
3
4
5
13
Bath spout
1
14
14
Ptfe tape
1
1/16 2/16