Manual

Fig. 2 – Using the machine itself as a template,
mark the three mounting holes. Allow about one
foot on both sides of your Square Deal “B” for
working room. Make sure your bench is sturdy and
does not shake, as this may disturb your powder
charge and primer system.
Fig. 3 – Drill the mounting holes and secure the
Square Deal “B” to your bench, using 1/4" bolts
(not supplied).
Fig. 4 – Install the return bracket (#13355)
between the bottom of the shaft (#13437) and the
spent primer chute (#13594). The spent primer cup
(#13651) simply hooks on the bottom of the chute.
Fig. 5 – Slide the cartridge collection box (#13756)
onto the chute bracket (#13659) as shown.
Fig. 6 – The locator buttons must be placed at
Stations 2, 3 and 4 to prevent the cartridge from
sliding off of the shellplate. The buttons can be
removed to access the case at these stations.
Fig. 2
Fig. 3
Fig. 4
Fig. 5
Fig. 6
7
13355
13594