User Manual

Ready? Let’s Set Up

Carefully remove your new Square Deal “B” from its

packaging. Set the small parts aside.

Fig. 1 – Install the ejected cartridge chute bracket

(#13659) with two large screws (#13976) from the parts

bag.

Fig. 2 – Using the machine itself as a template, mark

the three mounting holes. Allo

w about one foot on both

sides of your Square Deal “B” for working room. Make

sure your bench is sturdy and does not shake, as this may

disturb y

our po

wder charge and primer system.

Fig. 3 – Drill the mounting holes and secure the

Square Deal “B” to your bench, using 1/4" bolts (not

supplied).

Fig. 4 – Install the spent primer cup/return bracket

(#17212) on the bottom of the shaft (#13437). T

he spent

primer cup (#16211) simply slides onto the rails of the

bracket.

Fig. 3

Fig. 4

Fig. 1

16211

17212

Fig. 2

May 2007 Square Deal B Manual 5/17/07 2:23 PM Page 7