Owner's manual

Casefeed Assembly Conversion

(Right-Rear of the Machine)

1. Remove the hulls and the clear casefeed tube

from the machine.

2. Use a 9/64" Allen wrench to remove the screw

and washer on the casefeed sleeve assembly. Remove

the 12 gauge casefeed sleeve off the casefeed body.

Fig. 8

3. From the 28 gauge conversion box, retrieve the

28 gauge casefeed sleev

e and place it on the casefeed

bod

. Reinstall the screw and w

asher onto the

casefeed sleeve assembly. Note the difference in

diameter between the tw

o pieces.

ig. 9

4. Remove the 12 gauge disc from the casefeed

bowl.

Fig. 10

Both 20 and 28 gauge hulls use the small gauge

disc.

ig. 11

Fig. 11

Fig. 10

Fig. 9

Fig. 8

Fig. 7

12 ga.

28 ga.

SL 900, May 2007 5/21/07 11:51 AM Page 38