Instruction Manual

For expert assistance or to place an order, call [phone]
Dillon Case Lube,
Dillon Case Lube: Lay your cases out in a single layer and spray light-
ly with one or two passes. After 10 minutes the lubricant distributes itself
around the cases and you’re ready to load.
Dillon Rapid Polish 290: Add 2-3 capfuls to the media in your tumbler
and run. Rapid P
olish 290 has a residual value and stays in your tumbling
media. You’ll use less each time you clean your cases. Rapid Polish 290
contains no ammonia, so it won’t weaken brass cases!
DON’T
FORGET MEDIA
!
Crushed w
alnut hull polishing media – recommended for extremely
dirty or tarnished cases. Leaves a clean, matte finish.
Ground corn cob polishing media – recommended for all around
cleaning. Lea
v
es a shin
y
, smooth finish.
2
Dillon Case Lubricant and Rapid P
olish 290.
Case Lube - 8 oz #13733
Case Lube - case 20 bottles #20256
Rapid Polish 290 - 8 oz
#13804
Rapid Polish 290 - case 20 bottles #20255
10 Bottles of Each #21375
Walnut Media - 15 lb. bag #13287
Corn Cob Media - 10 lb. bag #13496
1 Bag each Corn & Walnut Media #21553
Accessory Manual, May 2007 5/22/07 8:27 AM Page 5