User manual

DKP-115/117/119-Fe User Manual 15
3. Installation
3.1 Install DKP-115/117/119-Fe into Cabinet
3.1.1 Notes
1. Please check all peripherals according the list before installation. To make sure
that the whole unit was not damaged and lost during shipping process. If you
encounter any problem, please contact your dealer.
2. Before installation, make sure all peripherals and computer have been turned
off.
3. The cabinet depth range must be in 504 ~ 1000 mm for DKP-115/117-Fe (554
~1000 mm for DKP-119-Fe). Contact your dealer for deeper cabinet application.
4. The cabinet depth is 614 ~ 800 mm for DKP-115/117-Fe (664 ~ 800 mm for
DKP-119-Fe), please refer to “Step A”.
The cabinet depth is 504 ~ 614 mm for DKP-115/117-Fe (554 ~ 614 mm for
DKP-119-Fe), please refer to “Step B”.
The cabinet depth is 800 ~ 1000 mm, please refer to “Step C”.
5. Reliable earthing of rack-mounted equipment should be maintained. Particular
attention should be given to supply connections other than direct connections to
the branch circuit.
3.1.2 Hardware Kits Contents
1. Rail with front and rear bracket x 2 (Please identify the brackets. Right and left
sides are different.)
2. Extended bracket x 2