DKP-115/117/119-Fe Single Rail Console with Modular KVM Switch User Manual Rev 1.
DKP-115/117/119-Fe User Manual I Packing List The complete DKP-115 / 117 / 119-Fe single rail console with modular KVM switch package consists of: One 1U 19” rack mount console Two rails with front and rear bracket Two extended brackets. Two Short brackets. Two bracket attachments. DKP-115/117-Fe bracket attachment DKP-119-Fe bracket attachment One 1.8 m KVM cable.
DKP-115/117/119-Fe User Manual II problem, contact your dealer. Please read this manual thoroughly, and follow the installation and operation procedures carefully to prevent any damage to the product, and / or any of the devices that connect to it. Safety Instructions 1. Please read these safety instructions carefully. 2. Please keep this User’s Manual for later reference. 3. Please disconnect this equipment from AC outlet before cleaning. Don’t use liquid or sprayed detergent for cleaning.
DKP-115/117/119-Fe User Manual 15. If one of the following situations arises, get the equipment checked by service personnel. The Power Cord or plug is damaged. Liquid has penetrated into the equipment. The equipment has been exposed to moisture. The equipment has not worked well or you can not get it work according to User’s Manual. The equipment has dropped and damaged. If the equipment has obvious signs or breakage.
DKP-115/117/119-Fe User Manual IV Index of Contents Packing List .......................................................................................................... I Safety Instructions ............................................................................................... II Index of Contents .............................................................................................. IV 1. General Information ..............................................................................
DKP-115/117/119-Fe User Manual V 3.3 Installing the Video Card and Video Driver ......................................... 25 3.3.1 Configuring the Display Settings ............................................... 25 3.3.2 Connecting the Console ............................................................ 26 3.4 Turning on the Console ..................................................................... 26 3.5 Testing the Console ..........................................................................
DKP-115/117/119-Fe User Manual 1. 1 General Information DKP-115/117/119-Fe single rail consoles with modular KVM switch offer industrial level input solution to optimize your space utilization by controlling your systems in just 1U. With the unique modular design, you can easily integrate more than 17 models of KVM switches with different functions and expand the connections up to 8 levels of the KVM switches. 1.1 Feature Easy to install, single rail design.
DKP-115/117/119-Fe User Manual 2 whole console back to you. 5. Save freight cost : Since you have to keep only 4 models of consoles and generate new models by yourself, you can ship all the goods by sea instead of by air. In case, you run out of the KVM switch stock, it is much cheaper to ship the KVM switch modules by air. 1.3 Advantage Easy to install: With the unique separate rail design. One man can install the console easily.
DKP-115/117/119-Fe User Manual 1.4 1.4.1 Product Specification DKP-115-Fe Specification Model name DKP-115-Fe Number of ports 1 Dimension 470.1 x 447.5 x 44 mm / 18.5 x 17.6 x 1.7 inches Package Dimension 606 x 551.5 x 230 mm / 23.9 x 21.7 x 9.0 inches Net Weight 12 Kg / 26.46 lbs Gross Weight 19.5 Kg / 43.0 lbs Display Size 15 inches Panel Type Active Matrix TFT LCD Resolution Capabilities Maximum Resolution up to 1024 x 768 (XGA) Pixel Pitch Supports 0.297 mm x 0.
DKP-115/117/119-Fe User Manual Figure 1-1.
DKP-115/117/119-Fe User Manual 1.4.2 DKP-117-Fe Specification Model name DKP-117-Fe Number of ports 1 Dimension 470.1 x 447.5 x 44 mm / 18.5 x 17.6 x 1.7 inches Package Dimension 606 x 551.5 x 230 mm / 23.9 x 21.7 x 9.0 inches Net Weight 13 Kg / 28.7 lbs Gross Weight 20.5 Kg / 45.2 lbs Display Size 17 inches Panel Type Active Matrix TFT LCD Resolution Capabilities Maximum Resolution up to 1280 x 1024 (SXGA) Pixel Pitch Supports 0.264 mm x 0.
DKP-115/117/119-Fe User Manual Figure 1-2.
DKP-115/117/119-Fe User Manual 1.4.3 DKP-119-Fe Specification Model name DKP-119-Fe Number of ports 1 Dimension 520.1 x 447.5 x 44 mm / 24.5 x 17.6 x 1.7 inches Package Dimension 606 x 551.5 x 230 mm / 23.9 x 21.7 x 9.0 inches Net Weight 14 Kg / 30.9 lbs Gross Weight 21.5 Kg / 47.4 lbs Display Size 19 inches Panel Type Active Matrix TFT LCD Resolution Capabilities Maximum Resolution up to 1280 x 1024 (SXGA) Pixel Pitch Supports 0.098 mm x 0.
DKP-115/117/119-Fe User Manual Figure 1-3.
DKP-115/117/119-Fe User Manual 2. 9 Panel Controls and OSD Function Controls Description Soft power on/off button. Adjacent LED is lit when on. Auto Auto-synchronize and scale down display to any valid factory preset timings. Press to scroll the function you want to adjust. Press to scroll the function you want to adjust. Menu To access the main menu. This button also acts as the “Enter” button. Table 2-1. Panel Controls Figure 2-1. DKP-115/117-Fe OSD Control Bar Figure 2-2.
DKP-115/117/119-Fe User Manual automatically and also tune the panel to its best condition. 2.2 Input Source 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune. Input Source Brightness Contrast Color Position Language Recall Exit 3. Press the“menu”button to enter,and you will see: VGA / DVI 4. Use the “Down” and “Up” button to select the input source of signal. 5. Press the “menu” button to enter 2.3 Brightness 1. Press the “menu” button. 2.
DKP-115/117/119-Fe User Manual 5. Press the “menu” button to enter. 2.4 Contrast 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune. Input Source Brightness Contrast Color Position Language Recall Exit 3. Press the “menu” button to enter. 4. Use the “Down” and “Up” button to adjust the contrast of the display. 5. Press the “menu” button to enter. 2.5 Color 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune.
DKP-115/117/119-Fe User Manual 3. Press the “menu” button to enter. And you will see: Icon Description 9300°K To set CIE coordinates at 9300°K color 7500°K To set CIE coordinates at 7500°K color 6500°K To set CIE coordinates at 6500°K color User To set user defined CIE Auto color To auto adjust color Return To exit and return to the previous page Table 2-2. Icon Description 4. Use the “Down” and “Up” button to adjust the color of the display. 5. Press “menu” to enter. 2.6 Position 1.
DKP-115/117/119-Fe User Manual 4. Use the “Down” and “Up” button to scroll. 5. Press the “menu” button to enter. 2.7 Language 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune. Input Source Brightness Contrast Color Position Language Recall Exit 3. Press the “menu” button to enter. And you will see: English German French Italian Spanish 4. Use the “Down” and “Up” button to scroll. 5. Press the “menu” button to enter.
DKP-115/117/119-Fe User Manual 2.8 Recall 1. Press the “menu” button. 2. Use the “Down” and “Up” button to scroll. Auto tune. Input Source Brightness Contrast Color Position Language Recall Exit 3. Press the “menu” button to enter, and you will see: Yes/ No 4. Select “Yes” button then ‘Menu” button to recall the factory setting. Select “No “ to return to the previous page. 2.9 Exit Press the “exit” button to quit OSD menu. 2.
DKP-115/117/119-Fe User Manual 3. Installation 3.1 Install DKP-115/117/119-Fe into Cabinet 3.1.1 15 Notes 1. Please check all peripherals according the list before installation. To make sure that the whole unit was not damaged and lost during shipping process. If you encounter any problem, please contact your dealer. 2. Before installation, make sure all peripherals and computer have been turned off. 3.
DKP-115/117/119-Fe User Manual 16 3. Short bracket x 2 4. Bracket attachment x 2 DKP-115/117-Fe bracket attachment DKP-119-Fe bracket attachment 5. Screw (length = 6 mm) x 6 6. Screw x 6 7. Key x 2 3.1.3 Step A (Install Console): 1. Adjust rail until two screws appear.
DKP-115/117/119-Fe User Manual 2. Loose (Not remove) seven screws. 3. Adjust rail to fit your cabinet 4. Install front and rear bracket on cabinet. 5. Tight seven screws up.
DKP-115/117/119-Fe User Manual 18 6. Repeat step 1~5 for the other side. 7. Push console into rails. (Be careful rear box loose when take out console from carton.) 8. Unlock and pull rail–lock switch (left and right at the same time) then push console to the end. lock unlock rail-lock switch 9. Install three screws (length = 6 mm) in rear of the console. (Both sides) 10. Finish installation as below.
DKP-115/117/119-Fe User Manual 19 3.1.4 Step B (Replace short bracket): 1. Remove seven screws. 2. Take two original brackets out. original bracket original bracket 3. Put short bracket to rear of the rail. short bracket 4. Install four screws (don’t tight-up) to combine rail, short bracket and bracket attachment. bracket attachment short bracket 5. Repeat step 1 ~ 4 for the other side. 6. Repeat step 3 ~ 10 of step A to finish the installation.
DKP-115/117/119-Fe User Manual 3.1.5 Step C (Replace extended bracket): 1. Loose (Not remove) seven screws. 2. Release six screws. 3. Take rear bracket out. original bracket 4. Adjust rail and input extended bracket to rear of the rail then adjust extended bracket to fit your cabinet. Install unless 2~3 screws (don’t tight-up) upon the length you need. One is forbidden. extended bracket 5. Repeat step 1 ~ 4 for the other side. 6. Repeat step 3 ~ 10 of step A to finish the installation.
DKP-115/117/119-Fe User Manual 3.1.6 Unload Step 1. Make sure the console has locked and turned off. 2. Loose two thumb screws and pull modular KVM switch out. 3. Release three screws in rear of the console. (Both sides) 4. Unlock. 5. Pull console out until console lock.
DKP-115/117/119-Fe User Manual 22 6. Pull rail-release switch and pull console out.(Both sides. Be careful when pull out console.) rail-release switch 7. Push rail-lock switch on the rail and push rail back.
DKP-115/117/119-Fe User Manual 23 3.2 Install Modular KVM Switch Step 3.2.1 Hardware Kits Contents 1. Bracket with thumb screw x 2 2. Screw (length = 6 mm) x 4 3.2.2 Install Modular KVM Switch Step 1. Install two screws (length = 6 mm) to combine bracket and KVM switch.
DKP-115/117/119-Fe User Manual 2. Push KVM switch into the rails from rear of cabinet. plastic rail of KVM switch rear view of rail 3. Tight thumb screw of bracket up to fix KVM switch in console and finish installation.
DKP-115/117/119-Fe User Manual 25 3.3 Installing the Video Card and Video Driver Before connecting the LCD console, make sure your computer has a video card already installed for the monitor. After you connect the console, install the video software driver. The video driver is supplied by the video card manufacturer and may be found on the CD-ROM that came with your computer. If you need information on installing a video card or video driver, refer to the manual that came with your video card. 3.3.
DKP-115/117/119-Fe User Manual 26 3.3.2 Connecting the Console To connect an LCD console to a computer, perform the following steps PS/2-USB switch Figure 3-1. The rear view of DKP-115/117/119-Fe 1. Turn off your computer. You should always turn off your computer before connecting or disconnecting a device. 2. Connect the video (VGA) connector of the KVM cable to the video card connector on the rear panel of your computer. 3.
DKP-115/117/119-Fe User Manual 27 2. Make sure the video image is centered within the screen area. Use the OSD controls to adjust the image (see note below) or press the Auto button on the right hand side of the monitor. If the unit does not power up when the panel is pulled up, try pushing the soft power on/off button on the left or under side of the monitor panel to power up the unit.
