Specifications
40
360Hz : “1”,”6”,”8”
380Hz : “1”,”7”,”C”
400Hz : “1”,”9”,”0”
420Hz : “1”,”A”,”4”
440Hz : “1”,”B”,”8”
Backlight Invert 0xe7
“0” | “1” |
“R” | “r”
”?”
Set On or Off
Reset
Query
“0” – Off
“1” – On
Red Offset for
selected colour
temperature
0xe8,
nn | “+” | “-” |
“r” | “R” |
“?”
Set the Offset of the red channel
for the selected colour temp. =
value/increment/decrement
Reset
Query
Red Offset for selected colour
temperature.
Green Offset for
selected colour
temperature
0xe9,
nn | “+” | “-” |
“r” | “R” |
“?”
Set the Offset of the green
channel for the selected colour
temp. =
value/increment/decrement
Reset
Query
Green Offset for selected colour
temperature.
Blue Offset for
selected colour
temperature
0xea,
nn | “+” | “-” |
“r” | “R” |
“?”
Set the Offset of the blue
channel for the selected colour
temp. =
value/increment/decrement
Reset
Query
Blue Offset for selected colour
temperature.
PIP Window Auto
Off
“0xee”, “0x41”
“0” |”1”
“?”
Auto Off / Auto On
Query
“0”- Off
“1”- On
Custom Sizing 0xef,
“0” | “1” | “2”
”?”
Custom sizing selection :
Overscan / Normal / Custom
Query
“0” – Overscan
“1” – Custom
“2” – Normal
3. Other control
Function Command Description Acknowledge (if enabled)
Select RS-232
acknowledge
0xc1, “0” | “1” Disable/enable command
acknowledge.
“0” – acknowledge disabled.
“1” – acknowledge enabled.
Auto-setup 0xc3 Start auto-setup of current
vmode.
“0” – fail.
“1” – successful.
Command
availability
0xc4, n Check whether a command is
available.
“0” – not available.
“1” – available.
Auto-calibration 0xc5 Start auto-calibration of gain
of the RGB amplifier.
“0” – fail.
“1” – successful.
Freeze frame
0xc6, “0” | “1”
Unfreeze / freeze frame
“0” – unfreeze.
“1” – freeze.
Soft Power On/Off 0xc8,
“0” | “1” |
“?”
Soft power
off/on
query
“0” – Turn off the LCD power and
backlight. Turn off memory
controller, Power down DVI
Power down ADC, Power
down Fclk PLL
“1” – Turn on the unit
Query video input
status
0xc9 Query the status of the
primary & pip status
“nn,nn” = input status
“nn,xx” digit = primary status:
“0”,”0” : invalid
“A”,”1” ARGB
“B”,”1” Composite
“B”,”2” Composite2
“C”,”1” S-video