User manual

Page 34 Digium, Inc. Release 1.01
Chapter 3: Configuration
incoming calls over the FXO rings phones 1 and 2, and voicemail is
routed to mailbox 1000.
Testing Your Configuration
1. Start Asterisk by typing:
asterisk
2. Connect to Asterisk and view the output by typing:
asterisk -vvvvr
3. Dial tone should be present on phones connected to the FXS ports.
Test your configuration by placing an outgoing call, placing a call
from extension 1 to 2, or receiving an incoming call. Successful
completion of these tasks indicates your configuration is working
properly.
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]