User manual

Release 1.01 Digium, Inc. Page 31
Chapter 3
Configuration
This chapter provides sample configurations to demonstrate customizing
the Asterisk software to meet your individual needs. Each section
explains basic options as examples. Once you have familiarized yourself
with the samples, you can edit the configuration files to meet your
specific needs.
Note: Only qualified service personnel should install the card. Users
should not attempt to perform this function themselves.
General Options
Open the
zapata.conf file from the /etc/asterisk/ directory.
The following is a sample configuration for a TDM822P card. You can
place this at the bottom of your
zapata.conf file.
;;General options
usecallerid=yes
hidecallerid=no
callwaiting=yes
threewaycalling=yes
transfer=yes
echocancel=yes
echocancelwhenbridged=yes
rxgain=0.0
txgain=0.0
;;FXS Modules
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]