User manual

Page 30 Digium, Inc. Release 1.01
Chapter 2: Card Installation
4. Confirm the card configuration by initiating a dmesg command. The
example in Figure 7 on page 30 shows a sample of the dmesg screen
output for a TDM844P card. The text shown may vary slightly
depending on the type of card installed:
Figure 7: dmesg Screen Shot
Note: You will make changes to the configuration files to set up
your dial plan and customize Asterisk to suit your particular needs.
These changes are stored in the /etc/zaptel.conf configuration file.
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]