User manual

Release 1.01 Digium, Inc. Page 27
Chapter 2: Card Installation
3. Expand the downloaded tarballs:
#tar -zxvf zaptel-1.X.X.tar.gz
#cd zaptel-1.X.X
#make
#make install
Note: If you don’t already have configuration files installed, you can
type make samples to install the default sample configuration files.
4. Download the latest released version of Asterisk (1.2.15 or later).
Asterisk can be downloaded using ftp or http.
It is accessible via ftp from ftp://ftp.digum.com/pub/asterisk
.
It is also accessible via http from http://ftp.digium.com/pub/asterisk
.
5. Expand the downloaded tarballs:
# tar -zxvf asterisk-1.2.xx.tar.gz
# cd asterisk-1.2.xx/
# make
# make install
Note: Substitute the version of Asterisk you are using with the XX in
the above command line.
Note: If the build fails, it may be because you are missing one of the
build dependencies, the kernel source, or development tools. Feel free
to contact your reseller where the card was purchased, or call Digium
Technical Support at 1.877.LINUX.ME (1.877.546.8963) for
assistance.
Note: Complete instructions for installing Asterisk are available at
www.asterisk.org
.
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]