User manual

Page 26 Digium, Inc. Release 1.01
Chapter 2: Card Installation
1. Check your lspci PCI device listing. Boot the computer into Linux.
After the machine has loaded, log in and execute the following:
# lspci
Confirm your lspci PCI device listing by scanning for the following
information in the output screen:
Figure 6: lspci Screen Shot
A Digium TDM800P module should be identified. If you do not
identify this controller, then your machine is not PCI 2.2 (or higher)
compatible and the card will not work with your equipment.
2. Download the latest Zaptel drivers (1.2.15 or later). The Zaptel
drivers can be downloaded using either ftp or http.
They are accessible via ftp from ftp://ftp.digum.com/pub/zaptel
.
They are accessible via http from http://ftp.digium.com/pub/zaptel/.
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]