User manual

Release 1.01 Digium, Inc. Page 25
Chapter 2: Card Installation
Software Installation
The card is only supported under Linux. Digium, Inc. recommends
Debian, Fedora, and Red Hat, however, all other distributions are
supported by Digium Technical Support. Digium hardware requires
drivers and libraries that are integrated with the Linux kernel. You can
obtain the source code from ftp.digium.com
. Detailed instructions are
provided in this section.
To install your TDM800P card, you will need:
 Full Linux kernel 2.6 (or later) source code.
 Development libraries and headers for libncurses (only necessary for
Asterisk).
 Development libraries and headers for zlib and openssl.
 If you are using the 1.2.x series of Asterisk and Zaptel, you will need
Asterisk 1.2.15 or newer, and Zaptel 1.2.15 or newer. If you are using
the 1.4.x series of Asterisk and Zaptel, you will need Asterisk 1.4.1 or
newer and Zaptel 1.4.1 or newer. If you are using Asterisk Business
Edition, you will need version B.2 or newer.
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]