User manual

Page 18 Digium, Inc. Release 1.01
Chapter 2: Card Installation
Shipment Inspection
The following items are included in shipment of the TDM800P:
 TDM800P card
 A combination of FXO and/or FXS modules
 User manual
Module Identification
The TDM800P card ships with FXO and/or FXS modules in place. These
are identified by their color. Take a moment to identify which modules
were shipped with your card.
 FXO (Foreign Exchange Office) modules are Red
 FXS (Foreign Exchange Station) modules are Green
See Figure 2 on page 20 for an example of the card shown with one of
each quad module.
Port Identification
Each card consists of eight RJ11 ports located on the bracket. Each port
correlates to a single module port (containing either FXO or FXS
modules). The ports are numbered in sequence from one to eight. The top
port is Port 1 and the bottom port is Port 8. See Figure 2 on page 20 for
appropriate identification of these ports.
Note: It is important to identify the type and location of your TDM800P modules.
You will need this information during the Asterisk configuration.
VoIPon www.voipon.co.uk [e-mail] Tel: [phone] Fax: [phone]