Specifications

Digium, Inc.

system.conf:

fxsks =

fxsks uses kewlstart signalling, which is loopstart signalling

supervision. For example, a TDM808E card would be config

following:

fxsks = 1-8

fxsks = 1,2,3,4,5,6,7,8

You should have identified the type of 800 Series card when

If you are not sure, refer to Module Identification on pag

assistance.

Note: The 800 Series cards do not support Ground S

http://arttel.ru

http://arttel.ru/shop/platy-dlya-ip-ats/voip-plata-digium-wildcard-tdm800p