Specifications

Digium, Inc.
The ports available for use depend upon the type of module
placement of the module on the card. The cards can accep
modules, for a total of 8 ports. If single modules are used,
modules can occupy the same space as a quad module. The
ports are identified on the card and their corresponding RJ
identified below. Please refer to Figure 2 for an example u
modules, and Figure 3 for an example using quad module
If a single module is used, the RJ11 port available for use
corresponding to the location of the module on the card. Th
ports correspond to the single module ports as shown in F
„ RJ11 Port 1 is used by Single Module Port 1
„ RJ11 Port 2 is used by Single Module Port 2
„ RJ11 Port 5 is used by Single Module Port 5
„ RJ11 Port 6 is used by Single Module Port 6
http://arttel.ru
http://arttel.ru/shop/platy-dlya-ip-ats/voip-plata-digium-wildcard-tdm800p