User manual

User Cautions
Caution.
This card is not intended for home use. It must be used in restricted
access locations and installed in UL Listed I.T.E. only.
Static Electricity.
To reduce the risk of damaging the unit or your equipment, do not
attempt to open the enclosure or gain access to areas where you are
not instructed to do so. Refer servicing to qualified service personnel.
Save these instructions for future reference.
Service Personnel Cautions
Warning.
This card must be used with the PC lid screwed down.
Telecommunications network voltages exist inside the PC!
The PC must be shut down and telecommunications line connection
shall be removed before opening the PC.
Electrical Shock.
To reduce the risk of injury, damage to the unit or your equipment, do
not attempt to touch the modules while they are powered. The case
should be securely closed before power is applied to the unit.
Servicing.
Disconnect telecommunications network cable before opening the
cover or removing the card from the motherboard.
Labeling.
For safety reasons, only connect equipment with a
Telecommunications Compliance label. This includes customer
equipment previously labelled Permitted or Certified.
Caution.
Only connect regulatory equipment (approved for use in your specific
country) to the telecommunications network voltage circuit ports.
Digium, Inc. Page 7