User manual

Appendix B: Specifications
Additional Power: four-pin 12V connector for FXS power supply
(required only if FXS modules are installed)
(AEX800) - PCI-E X1, compliant with PCI-E X1 1.0 or greater.
Environment.
Temperature: 0 to 50° C (32 to 122° F) operation
-20 to 65° C (-4 to 149° F) storage
Humidity: 10 to 90% non-condensing
Note: Operating temperature is limited to 0 to 40° C (32 to 104°F)
when used with optional PWR2400B Power Bracket.
Hardware and Software Requirements.
500-Mhz Pentium III or better
64MB RAM
Available PCI or PCI-Express Slot (as described previously)
Power Consumption.
The following table lists the power consumption for both the TDM800P
card (and its permutations) and the AEX800 card (and its permutations).
Note: 3.3 and 5 volt power is taken from the PCI slot. 12 volt power is
taken only from the four-pin hard disk drive connector or optional
PWR2400B.
Digium, Inc. Page 58