User manual

Appendix B
Specifications
This appendix provides specifications, required environmental
conditions, and maximum power consumption for the 800 Series
cards.
Physical (All Cards).
Size:
Weight:
6.48” × 4.2” × 0.68” (16.46 x 10.67 x 1.72 cm)
PCB size, does not include the PCI bracket.
Check your model carefully to be sure it will accept
this PCI card.
4.5 oz (127.58 gm) with no modules loaded
Each quad module adds 1 oz (28.35 g)
Interfaces.
Local Loop Access: Industry standard 6-pin RJ-11.
Note: FXS modules are not equipped with lightning protection and
should not be exposed to high voltage. Lightning or high voltage can
cause damage to an FXS module. Damage caused by lightning or high
voltage will void the product warranty.
The recommended maximum distance from an FXS module to its
connected device is 1,500 ft. (457m).
(TDM800P) - PCI Bus: 3.3V or 5V bus slot, half-length full-height PCI
card, 33MHz minimum bus speed, compliant with PCI 2.2 or greater.
Digium, Inc. Page 57