User manual

Release 2.0 Digium, Inc. Page 30
Chapter 2: Card Installation
1. Check your lspci PCI device listing. Boot the computer into Linux.
After the machine has loaded, log in and execute the following:
# lspci -n | grep d161
Confirm your lspci PCI device listing by scanning for the following
information in the output screen:
0000:01:00.0 0200:d161:<device identifier>
In the device listing shown above, <device identifier> will be
populated with one of the identifiers listed in the table below. If an
identifier is not displayed, then your machine is not PCI 2.2 (or higher)
compatible and the card will not work with your equipment.
Table 3: Device Identifiers
Model Identifier
TDM410 8005
AEX410 8006