User`s manual

Page 7 of 26
III. 2-port USB KVM Switch installation
1. System requirements:
· Computer: USB port, VGA port
· Operating System: Windows 98/98SE/2000/ME/XP/Vista, Mac
OS9/OSX, Linux Kernel 2.3 or Later, Solaris 8.
· VGA Cable: 1 VGA female-to-male cable per computer
· USB Cable: 1 USB cable with one Type-A end and one Type-B end per
computer
· 2. Hardware installation:
a. Connect the USB cable’s Type-A end to the computer’s USB port, and the
cable’s Type-B end to the KVM’s PC1 USB upstream port.
b. Connect the VGA male-to-Female cable between the VGA port on the
computer’s video card and the KVM’s PC1 monitor IN.
c. Repeat steps a thru b for the second computer, using the PC2 USB port and
monitor IN on the KVM.
PC1 HOST (RED)
PC2 HOST (RED)
HUB switch with PC1(Green)
HUB switch with PC2 ( Green ) Auto-Switch/ Auto-Scan ( Green )