User`s manual

Page 22 of 26
Pressing any Keys excluding number key [ 1 ], [ 2 ], [ 3 ] and [ 4 ] to
turn off the AutoScan Mode and the monitor screen will jump back to
the original Host.
When you activate the Auto-Scan mode, the USB KVM Switch
alternates between the two PCs and displays them on the monitor.
Each PC can be displayed at 5, 10, 15, or 20 seconds:
4.3 Auto-Scan Interval
[n] *(Available only when Auto-Scan function is ON)
You can change the Auto-Scan interval by pressing the appropriate number
key or the number pad keys.
n Scan Interval
[1] 5 sec.
[2] 10 sec.
[3] 15 sec.
[4] 20sec.