User manual

USB3.0
Power Switch
DC Jack
Backup Button
2
III. Package Content
one USB3.0 Docking Station
one Supported CD
one User's Manual
one 12V/2A Adapter
one USB3.0 cable
IV. Hardware installation
1. Install a 2.5" or 3.5"SATA HDD：
Plug the SATA HDD in the docking adapter directly,
and connect the USB cable to PC, then plug the end of
the power supply to the power jack, and the other end
plug to power source.
2. Remove a 2.5" or 3.5"SATA HDD：
Turn the button with clockwise rotation to remove the disk
drive (Note: please take care and hold the hard disk)