USB3.
Foreword Congratulations on your purchase of our product! We will show you a new storage concept with safety and convenience It is our pleasure to give you the best solution to expand your HDD'S Capacity and enhance your data's reliability in PC system or Mac system. Before using the product, please read this manual carefully for further recognizing of the product. I. System Requirement Basic environment for setup this device: Hardware requirement: a PC, Notebook with free USB Interface USB 1.1 or 2.
III. Package Content one USB3.0 Docking Station one Supported CD one User's Manual one 12V/2A Adapter one USB3.0 cable IV. Hardware installation 1. Install a 2.5" or 3. 5" SATA HDD： Plug the SATA HDD in the docking adapter directly, and connect the USB cable to PC, then plug the end of the power supply to the power jack, and the other end plug to power source. 2. Remove a 2.5" or 3.
3
Warning: Don' t shake the hard disk drive when it has been installed correctly, otherwise it maybe damage your hard disk drive. When inserting the hard disk drive in the docking station, please sure that the SATA port is arm at the appropriate SATA port of the docking station.
V.
VI. Backup software installation and usage Note: The backup software don’ t support MAC OS, just for Windows. A. Backup software installation 1.
2. Click [Agree] to accept the license agreement 3.
4. Click [OK] to finish installation B. Use backup function 1.
2. Press the backup button, program will appear [Please select file(s)], click [OK] 3.
4. Follow the instruction to press the button again or click [Start] with mouse 5.
6. Backup file finished now you may check the file on right window VII.
The LCD panel will appear HDD temperature and fan speed. Paste the temperature inductor on the center of the HDD to activate temperature display. In order to ensure HDD work fine and avoid data loss, the operating temperature have been preset as 60°C+/-5%. The warning buzzer will emit a continuous beeping sound for 15 seconds if the internal temperature exceeds this level. When this occurs, please work the cooling fan or have your HDD to cool down before continuing operation.
Set the e preset overh heating alarm m e screen appea ar the default Touch 3# [Enter], the eating alarm te mperature - 60 0Ԩ overhe Touch the 2# button [Set], [ the presset overheating g alarm temperrature will disp play 60Ԩ →65Ԩ→ →70Ԩ→30Ԩ→ →35Ԩ→40Ԩ→4 45Ԩ→50Ԩ→55 5Ԩ→60Ԩ Touch [Enter] button to confirm the e temperature you y expectt to preset.
VIII. Remove a external l On removing this unit from your computer, suggest to follow the below steps: 1. 2. 3. 4. 5.
* Format one new Hard Disk Drive If new Hard Disk Drive, you need to partition and format it before using. Please follow the steps below to format new Hard Disk Drive: 1) Right click [My Computer], and select [Manager] 2) System will display a "Computer Manager" window, and click [Disk Manager] on left window 3) On right window, the information of the new Hard Disk Drive will appear under the system disk, [Unallocated....
Disclaimer All the information in this document is subject to change without prior notice The manufacturer makes no representations or any warranties regarding the Contents of this manual. The information contained in this manual is provided for the general use by the customers. No part of this document may be reproduced or transmitted in any form by any means without the express written permission of The manufacturer.
