User manual

8
2.3 Driver Installation
The following section shows you how to install 2-Port Gigabit
Ethernet PCIe Card driver on different operating systems.
2.3.1 Installation for Windows XP/Vista/7
1. Insert the provided CD into your disk drive. The CD-ROM
will start automatically.
2. At the Windows desktop click Start, then Run.
3. Type D:\DN-10131\Windows\Setup.exe, then click OK.
(Change D:\ to match your CD-ROM drive letter)
4. Click “Next” to continue.
5. Click “Install” to continue.
Click “Finish” to end of the driver installation steps.