Datasheet

- 7 -
CONFIGURATION
8-Port Front View
16-Port Front View
1. Port Selection Switches
Press the push button to directly switch to the corresponding PC.
• In the cascade architecture, if the port is connected to KVM but not PC,
then the push button will not respond.
• Simultaneously press Push Buttons 1 and 2 to directly enter the
OSD Control Mode.
2. Port LEDs
These Port LEDs are built in the Port Selection Switches.
Online: A green light indicates that the PC or KVM connected to the
corresponding port is on and operating.
Selected: A red light indicates the situation of being connected to the port.
• If a port is connected to KVM, then the red light of that port will not on.
• Besides the special mode, the whole system architecture only has one
red light (indicating that the Console is connecting to the PC) or has no
red light (when powering on the KVM for the first time.)
3. Power LED
The blue light indicates that the KVM is operating.