Datasheet

- 5 -
FEATURES
‧ The keyboard, mouse and 19” LCD monitor were built-in on the KVM switch.
‧ Standalone machine controls up to 4/8/16 sets of PCs.
‧ Cascade controls 64/128/256 sets of PCs.
‧ Through OSD, you can use the hot key, mouse clicking and push button on front panel
to switch PCs.
‧ Monitors PC status by Auto Scan function.
‧ Supports resolution of 1280x1024, 75Hz and independently supports EDID & DDC2 of
each PC.
‧ Each Port on the panel of the KVM has independent push buttons and LED lamps for
easy switch and identification.
‧ Complies with the height of the 1U chassis specification and installable with a hanging
stand into a 19” chassis system.
‧ Requires no additional software or hardware.
‧ Supports hot plug; not necessary to turn off the original system regardless of a newly
installed PC or KVM.
EQUIPMENT REQUIREMENTS
Computer System
‧ A Supported VGA, SVGA, XGA, SXGA or Multisync Video Card.
‧ A PS/2 (mini-DIN 6Pin) Mouse port.
‧ A PS/2 (mini-DIN 6Pin) or AT (5-Pin DIN) with AT-to-PS/2 Adaptor Keyboard port.
Cable
‧ 3-in-1 KVM Cable; please contact your local distributor for detailed specification and
length.
Connected to CPU port of KVM Connected to Console port
of PC or Slave KVM