Datasheet

- 15 -
Item Description Default Other Selection
Channel Display
Mode
For Port Switching, Auto Scan and OSD
Close, the Monitor will show the Channel
information and mode selection.
Full
Number,
Name
Channel Display
Time
It shows the time for displaying channel
information.
5 Sec
10Sec, Always,
None
Auto Scan Time
For Auto Scan, it shows the residing time
for each port.
5 Sec
10Sec, 20Sec,
30Sec, 60Sec
OSD Entry Hot Key
Select to turn on the hot keys of the OSD
control screen.
NumLock
Scroll Lock,
Shift, None
Hot Key Switching
Turn on/off the “Ctrl” hot keys on the
keyboard for switching computer
functions.
OFF ON
Mouse Clicking
Turn on/off the keys of the mouse for
switching computer functions.
OFF ON
Beeper Sound Turn on/off the beeper sound function. ON OFF
Offline Skip
Set the offline skip function to auto or
manual.
Manual Auto
OSD Language Select the language for the OSD. English
Français,
Deutsch,
Italiano, Español
Security Level Select the security mode and level. None Low, High
Console Lock Time
*1
The lock time of console port. 5 Min
1Min, 3Min,
10Min, 30Min,
60Min
*1: You can select this option only if the Security Level is not “None”.
F1: Information; It provides the model name and F/W version information, which is
helpful for users to understand the updated version.
F4: OSD Position; You can enter the OSD position to make adjustments; we
recommend you to unify the resolution for all computer display mode, and use this
function again to adjust the OSD position. You can use the Up, Down, Left or Right
keys on the keyboard or a mouse to move the OSD position.
F8: Restore Default Setting; Restore the factory default settings. Please note that all
name lists will be cleared and the system settings are set to the default settings
as shown in the table above.
Esc: Exit; Exit the system setting and close the OSD. If you have made changes in this
option, the system will ask whether or not you want to save the setting before the
selected option is effective.