Datasheet

- 10 -
7. Power on the PC.
Note It is not necessary to power down the whole system for install a new PC or KVM
thereafter. All you need is to make sure that the new PC or KVM is OFF during the
installation. If the KVM powers down due to external factors (such as power failure or
the power of the KVM is turned off), we recommend you to reinstall the whole system.
Note: It is noteworthy that there are two levels available.
• Expansion
1. PCs
It is not necessary to power down the KVM or other computer connected to the
KVM system. You only need to power off the desired PC and connect the PC to the
CPU port of the KVM in parallel by the 3-in-1 cable, and then power on the PC.
2. Slave KVM
Make sure the power switch at the rear panel of the KVM is OFF. Use the AC power
cord (3-in-1 cable) to connect the console port of the slave KVM to the CPU port of
the master KVM. Power on the slave KVM.
For example:
If you want to install one Slave KVM and three PCs, then just follow Step 2 of the
foregoing method to add the slave KVM and install the PCs one by one according
to Step 1.