User manual

17
OSD OPERATION
OSD OVERVIEW
The On Screen Display (OSD) is used to handle all computer control and switching
procedures. All procedures start from the OSD main menu. To pop up the main menu, tap
the [Scroll Lock] twice.
Note: You can optionally change the hotkey to the Ctrl key, in which case you would tap [ctrl]
twice.
If OSD menu is set as “console locked”, you must input password each time the main menu
appears. If no password has been set, just press [Enter] to show main menu.
OSD menu interface is shown as below:
Note: OSD always starts in List View, with the highlight bar at the same position it was in the
last time it was closed.
OSD NAVIGATION
To dismiss OSD, press [Esc].
To move up and down through the list one line at a time, use the Up and Down Arrow Keys.
If there are more list entries than what can appear on the main screen, the screen will scroll.
To activate a port, move the highlight bar to it then press [Enter].
After selecting a port, the OSD menu automatically disappear and a blue tip window
appears to indicate the port currently selected.