User manual

4. Use the screws supplied with this package to attach the bars to the rear of the

switch.

SINGLE STAGE INSTALLATION

To set up your installation, do the following:

1. Plug your USB / PS/2 keyboard, USB / PS/2 mouse and monitor into the console

port section located on the unit’s rear panel

2. Using a KVM cable set, plug the DB 15 connector into any available CPU port on

the switch

3. At the other end of the cable, plug the keyboard, mouse, video cables into their

respective ports on the computer

4. Plug the power adapter cable into the switch’s power jack, then plug the power

adapter into an AC power source

5. Repeat steps 2-4 for any other computers you are connecting up

This completes the single stage installation, and you can turn on the power to the PCs.

NOTE: The LCD KVM switch initially links to PC connected to the first CPU port.