User manual

12
 Then open the front panel and the LCD can be turn on to 120 degrees. As shown
below:
UNLOCK
AUTO LOCK
 Press LCD power key (red), the LCD is on
After Use
 Press LCD power key -> the LCD power turns off
 Close LCD panel and lock the front panel
 Release guide lock
 Push the control panel into the cabinet totally, and then the power turns off
Hot Plug
The KVM control platform supports hot plug. It can be connected and disconnected without
turning power off. Please follow the steps:
 Hot plug PC connecting port:
When hot plugging PC port:
1. The connecting wire must be plugged into the port from which it is pulled out
2. Plug the mouse before plugging the keyboard
Power On/Off and Reboot
Power on:
1. Connect the computers to the KVM switch
2. Power on the KVM switch
3. Power on the PCs
Reboot:
If the KVM switch does not respond, just press the reset button on the panel