User manual

Combo KVM Extender, User’s Manual
- 8 -
 Cable Connection Diagram
2.3 Hardware Installation
1 Switch off all devices.
2 If the desirt keyboard/mouse interface to computer is PS/2, please turn off your
computer.
3 Connect your monitor, PS/2 and/or USB keyboard/mouse to the local unit
DS-51110 (Local) if you want to control your system at local console.
4 Connect your monitor, PS/2 and/or USB keyboard/mouse to the remote unit
DS-51110 (Remote) if you want to control your system at remote console.
5 Connect remote and local unit by using CAT5/CAT5E/CAT6 cable, the supported
maximum cable length is 200 meters.
6 Connect the 5V power supply to power on the local unit Local.
7 Connect the 5V power supply to power on the remote unit Remote.
8 Connect video, PS/2 and/or USB keyboard/mouse of local unit Local and
computer/KVM by using the supplied cables.
9 Turn on your computer if it was turned off.
10 Adjust video quality by using color skew or brightness switch if necessary.